Table of Contents
Through-Hole Resistors: Basics and Applications
Through-hole resistors (also known as leaded resistors) are one of the most common resistor types, characterized by metal leads that pass through drilled holes on a printed circuit board (PCB) for mounting. Unlike surface-mounted components, through-hole resistors offer strong mechanical stability, making them ideal for applications requiring durability, such as industrial equipment, prototyping, and repairs, where manual soldering is easier.
Key features of through-hole resistors:
- Leaded design for through-PCB mounting, ensuring robust connections in high-vibration environments.
- Available in various power ratings (typically 0.25W to 5W or more), suitable for both low and high-power circuits.
- Most commonly marked with color bands to indicate resistance value and tolerance, as they have sufficient surface area for this labeling system.
- Easy to handle and replace, making them a popular choice for hobbyists and prototyping projects.
Resistors on Circuit Boards (PCB Resistors)
Resistors are integral to PCB functionality, acting as “current controllers” to protect sensitive components, regulate voltage, and ensure circuit stability. On a PCB, resistors are mounted in two primary ways: through-hole mounting (THM) and surface mount technology (SMT). The choice between the two depends on factors like PCB size, component density, assembly method, and application requirements.
Key notes about PCB resistors:
- Through-hole resistors occupy more PCB space but offer better mechanical strength, while SMD resistors are compact and ideal for miniaturized, high-density PCBs.
- PCB resistors are available in fixed and variable types, with fixed resistors being the most common for standard current regulation.
- Proper resistor placement on a PCB is critical to avoid interference and ensure optimal performance, especially in high-frequency circuits where SMD resistors are preferred for their lower inductance.
How to Accurately Read Resistor Color Codes
Step-by-step guide to reading resistor color codes:
- Identify the tolerance band: The tolerance band (usually gold or silver) is typically the last band; position the resistor with this band to the right to ensure correct reading.
- Interpret significant digits:
- 3-band resistors: 1st = 1st significant digit, 2nd = 2nd significant digit, 3rd = multiplier.
- 4-band resistors: 1st = 1st significant digit, 2nd = 2nd significant digit, 3rd = multiplier, 4th = tolerance.
- 5/6-band resistors: 1st-3rd = significant digits, 4th = multiplier, 5th = tolerance, 6th = temperature coefficient (for 6-band resistors).
- Use the color code chart: Each color corresponds to a digit, multiplier, or tolerance (e.g., black = 0, brown = 1, red = 2; gold = ×0.1, silver = ×0.01; gold = ±5%, silver = ±10%).
- Calculate the resistance value: Multiply the significant digits by the multiplier to get the resistance in ohms (Ω). For example, a 4-band resistor with bands brown, black, red, gold = 10 × 100 = 1000Ω (1kΩ) with ±5% tolerance.
Reading SMD Resistors: Markings and Codes
SMD (Surface Mount Device) resistors are compact, surface-mounted components used in modern miniaturized electronics, such as smartphones, laptops, and IoT devices. Unlike through-hole resistors, SMD resistors use numerical or alphanumeric markings instead of color codes, as their small size makes color bands impractical.
Common SMD resistor marking systems:
- 3-digit code (standard tolerance, 5%): The first two digits are significant, the third is the multiplier (power of 10). For values less than 10Ω, “r” indicates a decimal point (e.g., 4r7 = 4.7Ω, 102 = 10 × 10² = 1000Ω = 1kΩ).
- 4-digit code (high precision, 1%): The first three digits are significant, the fourth is the multiplier (e.g., 1002 = 100 × 10² = 10,000Ω = 10kΩ).
- EIA-96 code (high precision, 1%): Uses two digits and one letter; the digits represent a standard value index, and the letter is the multiplier (e.g., 01b = 100 × 10 = 1kΩ).
| Code | Value | Code | Value | Code | Value | Code | Value | Code | Value | Code | Value |
| 1 | 100 | 17 | 147 | 33 | 215 | 49 | 316 | 65 | 464 | 81 | 681 |
| 2 | 102 | 18 | 150 | 34 | 221 | 50 | 324 | 66 | 475 | 82 | 698 |
| 3 | 105 | 19 | 154 | 35 | 226 | 51 | 332 | 67 | 487 | 83 | 715 |
| 4 | 107 | 20 | 158 | 36 | 232 | 52 | 340 | 68 | 499 | 84 | 732 |
| 5 | 110 | 21 | 162 | 37 | 237 | 53 | 348 | 69 | 511 | 85 | 750 |
| 6 | 113 | 22 | 165 | 38 | 243 | 54 | 357 | 70 | 523 | 86 | 768 |
| 7 | 115 | 23 | 169 | 39 | 249 | 55 | 365 | 71 | 53 | 87 | 787 |
| 8 | 118 | 24 | 174 | 40 | 255 | 56 | 374 | 72 | 549 | 88 | 806 |
| 9 | 121 | 25 | 178 | 41 | 261 | 57 | 383 | 73 | 562 | 89 | 825 |
| 10 | 124 | 26 | 182 | 42 | 267 | 58 | 392 | 74 | 576 | 90 | 845 |
| 11 | 127 | 27 | 187 | 43 | 274 | 59 | 402 | 75 | 590 | 91 | 866 |
| 12 | 130 | 28 | 191 | 44 | 280 | 60 | 412 | 76 | 604 | 92 | 887 |
| 13 | 133 | 29 | 196 | 45 | 287 | 61 | 422 | 77 | 619 | 93 | 909 |
| 14 | 137 | 30 | 200 | 46 | 294 | 62 | 432 | 78 | 634 | 94 | 931 |
| 15 | 140 | 31 | 205 | 47 | 301 | 63 | 442 | 79 | 649 | 95 | 953 |
| 16 | 143 | 32 | 210 | 48 | 309 | 64 | 453 | 80 | 665 | 96 | 976 |
SMD Resistor Multiplication Factors
| Code | Multiplication Factor |
| Z | 0.001 |
| Y/R | 0.01 |
| X/S | 0.1 |
| A | 1 |
| B/H | 10 |
| C | 100 |
| D | 1000 |
| E | 10,000 |
| F | 100,000 |
What Do Suffixes Like “r” and “p” Mean in Electrical Part Codes
In electrical component codes (including resistor codes), suffixes like “r” and “p” are used to indicate decimal points or multipliers, simplifying the representation of small resistance values without using decimal points, which can be easily misread.
Key suffix meanings:
- “r”: Represents a decimal point in resistance values, used for values less than 10Ω. For example, “4r7” = 4.7Ω, “r22” = 0.22Ω. In some alphanumeric coding systems, “r” also denotes a multiplier of 10⁻¹ (0.1).
- “p”: Typically used as a multiplier for very small resistance values, representing 10⁻² (0.01) in some coding systems. For example, a resistor marked “1p0” = 0.01Ω. Note: “p” can also refer to picofarads in capacitor codes, so context is key when decoding component markings.